Bench drill is a kind of small size, easy to operate, usually installed on the special work table to use small hole processing machine. The drilling diameter of bench drill press is generally below 13 mm and generally not more than 25 mm. The spindle speed is generally achieved by changing the position of the triangle belt on the tower belt wheel, and the spindle feed is manually operated. The following small series for you to introduce the bench drill safe operation procedures and maintenance methods.
1、The power source must be consistent with the requirement of the motor (see the nameplate of the motor).
2、All prongs of the power plugs and outlets must be reliable, without laxity an-d bad touch apperance.
3、Don’t abuse wire and drag the power wire. Wire should leave hot, greasy sharp edge locations away.
4、When appears trouble, turn switch "OFF" and remove the plug from the power source outlet before maintaining or lubricating your drill press.
5、This machine must be grounded securely.
6、Keep guards in working order, and in proper adjustment and alignment.
7、Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
8、Keep work area clean. Don't use power tools in damp or wet or weak light locations or expose them to rain.
9、With padlocks, master switches, by removing starter keys, or storing tools where children can't get them.
10、All visitors should be kept a safe distance from work area.
11、Don't force tools or attachment to do a job it was not designed for.
12、Don't wear loose clothing, gloves, necklaces or jewelry to get caught in moving parts. NONSLIP footwear is recommended. Wear proctective hair covering to contain long hair. Roll long sleeves above the elbow.
13、Don't operate the machine after drinking and tiredness.
14、Keep proper footing and balance at all times.
15、Maintain the machine regularly, keep the tools sharp and add lubrication when cutting.
16、Make sure switch is in "OFF" position before plugging in.
17、Use the recommended accessories or unit to avoid hazards.
18、Don't store materials above or near the tool, in case of serious injury.
19、Before further use of tool, a guard or other part that is damaged should be carefully checked, so that it should be properly repaired or placed.
20、When cutting large diameter holes, keep speed slower.
